SKUNK2 Front & Rear Adjustable Camber Kits Pro Series. To accommodate the needs of the market, we made a significant change in 1998 by adding an oversized rectangular shaped top mount for increased positive camber adjustment. In 2000 we pioneered the use of a one-piece forged ball joint. And in 2004 we introduced the patent pending Pro-Series ball joint.Today this same design has become the industry reference standard. The Skunk2 Camber Kits are the number one choice of many pro racing teams and have been on Honda Factory road race cars since 1997. By replacing your factory upper control arms with our camber kits, you gain the ability to correct negative camber that results from lowering your vehicle. Skunk2 front camber kits allow tuners to accurately dial in their suspension settings utilizing quick adjustment sliding ball joints. With over +/- 3 degrees of adjustment our camber kits can minimize the effects of negative camber, help reduce abnormal tire wear, and increase stability at high speeds. Skunk2 camber kits are ideal for race or street applications. Available in Pro-Series Plus, Pro-Series, and Tuner Series.
This is what we recommend as a good entry-level camber kit. The Pro-Series camber kit features the same one-piece forged Pro-Series balljoint used in the Pro-Plus kit, but instead of polyurethane bushings, the Pro uses standard high quality rubber bushings.
Though the Pro kit is slightly more expensive than the Tuner series, the benefits and convenience offered by the Pro-Series ball joint provide excellent value. The design of Skunk2 Rear Camber Kits is based on camber kits that we have been using in our race cars for many years. Skunk2 Rear Camber Kits are a must if you want to fine tune your rear suspension.
Made from forged alloy steel and aircraft quality AL7075 aluminum, Skunk2 Rear Camber Kits feature low deflection polyurethane bushings. The bushings act as a bearing allowing your camber kit to pivot smoothly without the harsh side effects of using actual spherical bearings. Unlike the steel and rubber bushings that are found on low quality rear camber kits, these will not tear or break free. The Skunk2 Rear Camber Kit is the perfect choice for street and race applications, and works even better when used in conjunction with Skunk2 Rear Lower Arms, Arm Bars, Strut Bars, and Front Camber Kits.
Pro-Series ball joint allows for quick and easy bottom up camber adjustment. This is especially useful on lowered vehicles with short stroke shock absorbers. By using the Pro-Series balljoint, the Pro and Pro-Plus camber kits have a lower profile that provides 5mm more clearance between the top of the camber kit and bottom of the strut tower. The Pro-Series ball joint also features cadmium plating for additional corrosion resistance and a trick racing look. Notes: Professional installation is highly recommended.
Prices shown and stock available are subject to change without notice. Items may arrive in multiple boxes or at different times. Tracking numbers will be provided for separate packages. We do not guarantee a specific carrier, as it may be location specific.Picture request may be required for claims regarding damages or wrong item(s) received. _gsrx_vers_818 GS 7.0.10 (818). The item "SKUNK2 Front+Rear Camber Kit Pro 88-91 Honda Civic/CRX EF" is in sale since Monday, May 14, 2012. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Caster/Camber Kits". The seller is "tda_motorsports" and is located in Rancho Cucamonga, California.
This item can be shipped worldwide.