Rear Camber Kit

Megan Racing Rear Camber Arm Kit For 10-18 V60 1st Gen DE/11-20 S60 2rd Gen

Megan Racing Rear Camber Arm Kit For 10-18 V60 1st Gen DE/11-20 S60 2rd Gen

Megan Racing Rear Camber Arm Kit For 10-18 V60 1st Gen DE/11-20 S60 2rd Gen
Megan Racing Rear Camber Arm Kit For 10-18 V60 1st Gen DE/11-20 S60 2rd Gen. Wheel alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, under-steer, over-steer, acceleration, braking and tire wear. Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified. From the factory, most cars are set to have under-steer and for optimum tire wear at stock height; under-steer is often undesired from a performance standpoint but is always dependent on driver style, therefore the adjust-ability of the alignment of a vehicle is critical when tuning for speed.

The clock does not lie and having the vehicle alignment can make seconds of a difference. Has developed reinforced and adjustable control arms to accommodate the needs of the aggressive and performance oriented tuner.

These arms are constructed with Lightweight Steel-Alloy, which is able to withstand the stresses of extreme competition. When lowering a car, these will eliminate premature tire wear caused by the rear wheels riding upon the inside tread only.

Combine with Rear Toe Arms and Rear-Rear Control Arms for the ultimate in adjust-ability. Remembering that the only thing that touches the ground is your "Contact Patch" of your tires you have to make sure that your tires and wheels are doing exactly what you want. With this you must make sure you have the proper camber, caster and toe as well as make sure they are all working together and not against each other. Bushings are made of hardened rubber, 50% Harder than stock bushings. Made with high-strength and anti-cranking rubber material.

1 Pair x Camber Arm (Left & Right). Do you carry other parts and accessories for this Vehicle? What is the adjustment range for the camber arm? Megan Racing typically design a +\-20mm length adjustment from OEM arm.

That's typically a +\- 2 degrees of camber angle. But this cannot give a definite degree because that actual number changes varying on the cars height. The lower the car, the more native negative chamber the suspension will produce.

So a rule of thumb is +\- 2 degrees from that point with most Megan Racing camber arm. Unincorporated Territory of the United States: Address include American Samoa, Guam, Northern Mariana Islands, Puerto Rica, U. Virgin Islands, Baker Island, Howland Island, Jarvis Island, Johnston Atoll, Kingman Reef, Midway Atoll, Navassa Island, Wake Island, APO/FPO/DPO/AE and P. We can only process your orders though United Stated Postal Service. Rest assured that backorders do not get lost or forgotten about.

We are committed to offering our customers the best possible selection of quality merchandise while providing fully satisfied customer services. We do NOT accept return that has been used or installed. We do NOT accept International order for return. This does not mean they cannot function on such vehicles, but merely that they may not uphold to the regulations and restrictions of a highway vehicle and therefore must be designated as OFF-ROAD USE ONLY. For OBD-TI vehicles, the use of any manifolds or test pipes may remove a Catalytic Converter, in doing so this will trigger a Check Engine. Light due to Catalytic Converter failure; this sometimes can cause the vehicle to enter into a (Null Mode) which can alter the vehicles performance in a negative fashion. We is Not Responsible for any Labor Costs With installing, modifying or removal of any products regardless of the situation that has occurred and will not be held liable for such costs.

We are not responsible for any Penalties or Fines Associated with the use of any of the products that we sell. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing. All items do not come with installation instruction unless otherwise specified. Our main product category include Induction System, Exhaust System, Performance Parts, Interior, Exterior, Fabrication, Suspension, Trailer Parts and more. Please do assist us here, and take the short time to send through your feedback.

If for any reason you are not satisfied please contact me before leaving feedback. We strive for 100% satisfied loyal customers who are happy to shop with us again & again. Powered by SixBit's eCommerce Solution. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Steering & Suspension\Camber & Caster Parts".

The seller is "urmarketoutlet" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.

  • Application: For 2010-2018 V60 1st Gen DE
    For 2011-2020 Volvo S60 2rd Gen
  • Part Type: Camber Arm
  • Brand: Megan Racing
  • Manufacturer Part Number: MRC-VV-0290
  • Interchange Part Number: MRC-VV-0290
  • Other Part Number: MRCVV0290
  • Type: Camber Arm
  • Placement on Vehicle: Rear
  • Color: Blue
  • Material: Steel Alloy
  • Installation: Adjustable
  • Fitment Type: Performance/Custom
  • Install Manual: No Instruction, Professional Install Recommended
  • Fitment: Fitment/Measurement Based On U.S Model
  • Surface Finish: Powdercoated
  • Style: Performance Style
  • UPC: 788536935941


Megan Racing Rear Camber Arm Kit For 10-18 V60 1st Gen DE/11-20 S60 2rd Gen