Megan Racing Blue Rear Upper Camber/Toe Arm Kit For 08-17 Accord/09-14 TSX TL

Megan Racing Blue Rear Upper Camber/Toe Arm Kit For 08-17 Accord/09-14 TSX TL. The Honda Accord 08+ and Acura TSX and TL Adjustable Rear Camber Arm by itself allows camber change of up to +/-1 degree. The Rear Toe Control Arm (P# MR-6724) and Rear Lateral Arm (P# MR-6756) may be required if more than 1 degree change is required. This single arm is also an ideal replacement arm for a damaged arm.

Attention: Toe will change as you adjust camber with this control arm. MR-6757 ONLY CAN DO Camber: +/-1.0 degree. If more than 3.0 degrees is necessary, please install MR-6724, MR-6756, and MR-6757 all together. Camber Kit - Wheel alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, under-steer, over-steer, acceleration, braking and tire wear. Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified. From the factory, most cars are set to have under-steer and for optimum tire wear at stock height; under-steer is often undesired from a performance standpoint but is always dependent on driver style, therefore the adjust-ability of the alignment of a vehicle is critical when tuning for speed. The clock does not lie and having the vehicle alignment can make seconds of a difference. Has developed reinforced and adjustable control arms to accommodate the needs of the aggressive and performance oriented tuner. Being constructed of a Lightweight Steel-Alloy which is able to withstand the stresses of extreme competition, these arms are powder-coated with a 3-Stage process to ensure durability and protection against the elements. Toe Arm - Those who seek the most from their car know that in the rigors of competition you need to extract every ounce of performance from your machine.

You need the capability to have every degree of adjustment above and beyond that of a street driven vehicle. You need the strength to withstand the stresses and strains of hard corners, a rough course and brutal weight transfer and chassis flex. It is within this understanding that Megan Racing has unveiled our line of reinforced suspension arms that offer the strength and adjustment that any competition vehicle will ever need. Constructed of high-strength steel alloys that offer durability, strength and yet remain light-weight, these control arms have been track tested for months in the road race, autocross and drift events to assure quality and performance.

Placement: Rear Upper (Camber Kit), Rear (Toe Arm). Part Type: Alignment Camber Kit, Toe Arm.

Hard Rubber bushings for a more direct feel and driving experience. Ensure Even or Desired Contact with the Ground; i. Measurement (MRS-HA-0114): Minimum Arm Length: 16 5/8" Maximum Arm Length: 18 5/8" (measured center hole to center hole). Measurement (MRS-HA-0171): Eyelet Width: 1 3/4" Eyelet Bolt-hole Inner Diameter: 7/16" ID Minimum Arm Length: 9 3/8" Maximum Arm Length: 10 7/8" (with safe amount of thread engagement maintained). 1 Pair x Rear Upper Camber Kit (Left & Right) MRC-HA-0114 1 Pair x Rear "Front Middle Section" Toe Arm (Left & Right) MRC-HA-0171. Do you carry other parts and accessories for this Vehicle?

What is the adjustment range for the camber arm? Megan Racing typically design a +\-20mm length adjustment from OEM arm.

That's typically a +\- 2 degrees of camber angle. But this cannot give a definite degree because that actual number changes varying on the cars height. The lower the car, the more native negative chamber the suspension will produce.

So a rule of thumb is +\- 2 degrees from that point with most Megan Racing camber arm. Unincorporated Territory of the United States: Address include American Samoa, Guam, Northern Mariana Islands, Puerto Rica, U. Virgin Islands, Baker Island, Howland Island, Jarvis Island, Johnston Atoll, Kingman Reef, Midway Atoll, Navassa Island, Wake Island, APO/FPO/DPO/AE and P.

We can only process your orders though United Stated Postal Service. Rest assured that backorders do not get lost or forgotten about. We are committed to offering our customers the best possible selection of quality merchandise while providing fully satisfied customer services. We do NOT accept return that has been used or installed. We do NOT accept International order for return.

This does not mean they cannot function on such vehicles, but merely that they may not uphold to the regulations and restrictions of a highway vehicle and therefore must be designated as OFF-ROAD USE ONLY. For OBD-TI vehicles, the use of any manifolds or test pipes may remove a Catalytic Converter, in doing so this will trigger a Check Engine. Light due to Catalytic Converter failure; this sometimes can cause the vehicle to enter into a (Null Mode) which can alter the vehicles performance in a negative fashion. We is Not Responsible for any Labor Costs With installing, modifying or removal of any products regardless of the situation that has occurred and will not be held liable for such costs.

We are not responsible for any Penalties or Fines Associated with the use of any of the products that we sell. For emissions related items, please check with your local jurisdiction for emission specific requirements before purchasing. All items do not come with installation instruction unless otherwise specified. Our main product category include Induction System, Exhaust System, Performance Parts, Interior, Exterior, Fabrication, Suspension, Trailer Parts and more. Please do assist us here, and take the short time to send through your feedback.

If for any reason you are not satisfied please contact me before leaving feedback. We strive for 100% satisfied loyal customers who are happy to shop with us again & again. Powered by SixBit's eCommerce Solution. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Steering & Suspension\Camber & Caster Parts".

The seller is "urmarketoutlet" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.

Application: For 2009-2014 Acura TSX
For 2009-2014 Acura TL
For 2008-201
Remark: The Honda Accord 08+ and Acura TSX and TL Adjustable Rear Camber
Brand: Megan Racing
Manufacturer Part Number: MRC-HA-0114, MRC-HA-0171
Interchange Part Number: MRS-HA-0114, MRS-HA-0171
Other Part Number: 788536930700, 788536930793
Installation: Adjustable
Material: Steel Alloy
Color: Blue
Surface Finish: Powdercoated
Placement on Vehicle: Rear (Toe Arm), Rear Upper (Camber Kit)
Part Type: Alignment Camber Kit
Style: Performance Style
Fitment Type: Performance/Custom
Install Manual: No Instruction, Professional Install Recommended
Fitment: Fitment/Measurement Based On U.S Model
Type: Alignment Camber Kit