MEGAN 2pc Rear Camber Control Arm for Honda Accord 08-17, Acura TL TSX 09-14
MEGAN 2pc Rear Camber Control Arm for Honda Accord 08-17, Acura TL TSX 09-14. BRAND NEW MEGAN RACING - REAR CAMBER ARM (MRS-HA-0114 / Old# 6757). FIT: HONDA ACCORD 08-17 / TSX 09-14 / TL 09-14. Wheel alignment is absolutely crucial when modifying your car. Alignment can effect every aspect of your driving experience, from straight line stability, under-steer, over-steer, acceleration, braking and tire wear.
Although stock components allow slight alignments from the stock suspension settings, they often are not able to properly align the car after the suspension has been modified. From the factory, most cars are set to have under-steer and for optimum tire wear at stock height; under-steer is often undesired from a performance standpoint but is always dependent on driver style, therefore the adjust-ability of the alignment of a vehicle is critical when tuning for speed. The clock does not lie and having the vehicle alignment can make seconds of a difference.
Has developed reinforced and adjustable control arms to accommodate the needs of the aggressive and performance oriented tuner. Being constructed of a Lightweight Steel-Alloy which is able to withstand the stresses of extreme competition, these arms are powder-coated with a 3-Stage process to ensure durability and protection against the elements. When lowering a car, these will eliminate premature tire wear caused by the rear wheels riding upon the inside tread only. Combine with Rear Toe Arms and Rear-Rear Control Arms for the ultimate in adjust-ability. SPECIFICATIONS & FEATURES: NOTE: The Honda Accord 2008+ and Acura TSX 2009+ and TL 2009+ Adjustable Rear Camber Arm by itself allows camber change of up to ±1 degree.
The Rear Toe Control Arm (P# MR-6724) and Rear Lateral Arm (P# MR-6756) may be required if more than 1 degree change is required. This single arm is also an ideal replacement arm for a damaged OE arm. Attention: Toe will change as you adjust camber with this control arm. MR-6757 ONLY CAN DO Camber: ±1.0 degree.
If more than 3.0 degrees is necessary, please install - MR-6724, MR-6756, and MR-6757 all together. MEASUREMENTS: - Minimum Arm Length: 16 5/8" - Maximum Arm Length: 18 5/8" (measured center hole to center hole) - Constructed of Steel Alloy for Lightweight yet Durable performance. Hard Rubber bushings for a more direct feel and driving experience. Easy to access turnbuckle-style adjustment. Can be adjusted without removing from the vehicle. The items in the listing are found to have compounds and chemicals known to the State of California to cause cancer, birth defects, and reproductive harm. PO Box, HI, AK, PR, GU, VI, MP, APO or FPO. FOR ALL INTERNATIONAL/ CANADA CUSTOMER. We have no control over these charges and cannot predict what they may be. Most of our auto parts are design for US/Canada vehicle. It may fit on foreign vehicle. Please contact to us within 5 days after you received the item. If you receive a wrong item, please contact.All return must be made within 30 days from the day you received the item. Powered by SixBit's eCommerce Solution. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Steering & Suspension\Camber & Caster Parts".
The seller is "e-autosports" and is located in this country: US. This item can be shipped worldwide.
- Brand: Megan Racing
- Placement on Vehicle: Rear
- Manufacturer Part Number: MRS-HA-0114
- Manufacturer Warranty: 1 Year
- Interchange Part Number: 6757
- Part Brand: Megan Racing
- Warranty: 1 Year