Rear Camber Kit

3 inch (76mm) Lift Kit with Camber Adjusters for 2003-2011 Honda Element

3 inch (76mm) Lift Kit with Camber Adjusters for 2003-2011 Honda Element
3 inch (76mm) Lift Kit with Camber Adjusters for 2003-2011 Honda Element
3 inch (76mm) Lift Kit with Camber Adjusters for 2003-2011 Honda Element

3 inch (76mm) Lift Kit with Camber Adjusters for 2003-2011 Honda Element
Our kits are designed to work with your factory Honda suspension to achieve approximately 2.75 inches (front) and 3.0 inches (rear) of lift without. Having to disassemble the struts. Complete kit includes: 4 steel strut spacers (2 front & 2 rear), adjustable rear upper control arms, adjustable offset camber bolts for the front, hardware and detailed illustrated installation instructions. We recommend using our 1 inch subframe kit with a 3 inch lift. For off road use only!

Q: Why are the front spacers taller than the rear spacers? A: The suspension geometry is different in front than in rear. In order to get an equal amount of lift front and back, different size spacers have to be used. Q: Will I need an alignment after installing this kit?

A: Yes, just as if you lowered your car, lifting changes the wheel alignment. It is also recommended to install camber correction kits for lifts greater than 1 inch. Q: What are the extra bolts for? A: The 2 cam bolts included in this kit are used to adjust the camber on the front suspension, which is necessary after installing a lift kit. Q: Will lifting my car affect the axles?

It depends on the amount of lift and the type of axles you have in your vehicle. Parts store rebuilt axles are more prone to having issues. In general, installing lift spacers greater than 2 inches will require a subframe kit (drop) or "body lift" to maintain proper axle angle.

Q: Do I need to replace my suspension bushings when installing a lift kit? A: It depends on the condition of your existing bushings. We always recommend inspecting your factory bushings and replacing them with urethane bushings such as Energy Suspension if needed. The added benefit of installing urethane bushings is that it allows the suspension to move more freely without binding up. A: In most cases, yes.

By lifting the suspension you are effectively raising the roll center of the car, which can cause additional body roll. Our lift kits are intended for off-road use where suspension travel and ground clearance are more important.

The item "3 inch (76mm) Lift Kit with Camber Adjusters for 2003-2011 Honda Element" is in sale since Saturday, March 30, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts". The seller is "hrgengineering" and is located in Mooresville, North Carolina.

This item can be shipped to United States, Canada.

  • Country/Region of Manufacture: United States
  • Lift Height: 2.75 inches Front & 3.0 inches rear
  • Adjustable: No
  • Type: Spacer
  • Manufacturer Part Number: HRG-ELE0311LK3.1
  • Included Hardware: Mounting Hardware
  • Placement on Vehicle: Front
  • Brand: HRG Engineering
  • Fitment Type: Performance/Custom
  • Warranty: Lifetime


3 inch (76mm) Lift Kit with Camber Adjusters for 2003-2011 Honda Element