Rear Camber Kit

3 inch (76mm) Lift Kit with Camber Adjusters for 2002-2006 Honda CR-V

3 inch (76mm) Lift Kit with Camber Adjusters for 2002-2006 Honda CR-V

3 inch (76mm) Lift Kit with Camber Adjusters for 2002-2006 Honda CR-V

Our lift kits are designed to work with your factory Honda suspension to acheive approximately 3 inches (76mm) of lift. Complete kit includes: set of 4 spacers (2 front and 2 rear), adjustable control arms for the rear and offset camber adjustment bolts for the front, hardware and detailed illustrated installation instructions. This kit utilizes a larger spacer for the front so the vehicle sits level and not rear-high. Our kits are powdercoated for a durable, attractive finish and use zinc plated grade 10.9 hardware. Please check out our store for more.

For off road use only! Stock 205/70/15 (26.3") Stock 215/65/16 (26.4") +1.5 215/70/16 (27.8") +2.5 235/70/16 (28.9") +3 225/75/16 (29.2") +3.5 235/75/16 (29.8") +4 255/70/16 (30.0). Q: Will I need an alignment after installing this kit? A: Yes, just as if you lowered your car, lifting changes the wheel alignment. It is also recommended to install camber correction kits for lifts greater than 1 inch (included in this kit). Q: Will lifting my car affect the axles?

Rebuilt axles are more prone to having issues. In general, lifting higher than 2 inches (51mm) will require a subframe kit (drop) or "body lift" to maintain proper axle angle. Please see our other listings of these kits and more. Q: Do I need to replace my suspension bushings when installing a lift kit? A: It depends on the condition of your existing bushings.

We always recommend inspecting your factory bushings and replacing them with urethane bushings such as Energy Suspension if needed. The added benefit of installing urethane bushings is that it allows the suspension to move more freely without binding up. A: In most cases, yes.

By lifting the suspension you are effectively raising the roll center of the car, which can cause additional body roll. Our lift kits are intended for off-road use where suspension travel and ground clearance are more important.

The item "3 inch (76mm) Lift Kit with Camber Adjusters for 2002-2006 Honda CR-V" is in sale since Monday, January 27, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts". The seller is "hrgengineering" and is located in Mooresville, North Carolina. This item can be shipped to United States, Canada.
  • Country/Region of Manufacture: United States
  • Lift Height: 3 inches Front & Rear
  • Manufacturer Part Number: HRG-CRV0206LK2.2
  • Included Hardware: Mounting Hardware
  • Placement on Vehicle: Front
  • Brand: HRG Engineering
  • Fitment Type: Performance/Custom
  • Warranty: Lifetime

3 inch (76mm) Lift Kit with Camber Adjusters for 2002-2006 Honda CR-V