2 inch (51mm) Lift Kit with Camber Adjusters for 2007-2016 Honda CR-V
Our steel strut spacers are designed to work with your factory Honda suspension to acheive approximately 2 inches (51mm) of lift. Complete kit includes: set of 4 spacers (2 front & 2 rear), adjustable control arms for the rear, offset camber adjustment bolts for the front, hardware and detailed illustrated installation instructions.
These spacers do not require the disassembly of the strut. Our kits are powder coated for a durable, attractive finish and use zinc plated grade 10.9 hardware.
Please check out our store for more. For off road use only!Q: Why is the front spacer taller than the rear spacer? A: Due to differences in the suspension geometry from front to rear, different height spacers must be used in order to achieve the desired height.
Q: How is the lift measured? A: From the fender lip to the ground. Q: Will I need an alignment after installing this kit? A: Yes, just as if you lowered your car, lifting changes the wheel alignment. It is also recommended to install camber correction kits for lifts greater than 1 inch.
Q: Will lifting my car affect the axles? It depends on the amount of lift and the type of axles you have in your vehicle.
Parts store rebuilt axles are more prone to having issues. In general, installing lift spacers greater than 1.5 inches will require a subframe drop or "body lift" to maintain proper axle angle. Q: Do I need to replace my suspension bushings when installing a lift kit? A: It depends on the condition of your existing bushings. We always recommend inspecting your factory bushings and replacing them with urethane bushings such as Energy Suspension if needed. The added benefit of installing urethane bushings is that it allows the suspension to move more freely without binding up.A: In most cases, yes. By lifting the suspension you are effectively raising the roll center of the car, which can cause additional body roll.
Our lift kits are intended for off-road use where suspension travel and ground clearance are more important. The item "2 inch (51mm) Lift Kit with Camber Adjusters for 2007-2016 Honda CR-V" is in sale since Saturday, August 10, 2019. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Suspension & Steering\Lift Kits & Parts". The seller is "hrgengineering" and is located in Mooresville, North Carolina. This item can be shipped to United States, Canada.- Type: Spacer
- Country/Region of Manufacture: United States
- Lift Height: 2 inches Front & Rear
- Manufacturer Part Number: HRG-CRV0716-1.75
- Part Type: Suspension Lift Kit
- Included Hardware: Mounting Hardware
- Placement on Vehicle: Front
- Brand: HRG Engineering
- Fitment Type: Performance/Custom
- Warranty: Lifetime